Network Settings - Husky Altanium Delta3 User Manual

Mold Setup Configuration
Screen Image
4.5

Network Settings

On the Network Setup screen, the user can enter the network path for the shared network
folder for uploading files from or downloading files to the controller, in the format
\\server\shared folder. The controller uses the following network user credentials:
User Name: husky
Password: husky
To modify the network settings, do the following:
1.
2.
3.
36
v 2.3 — September 2015
Print Report Type
On the Home screen, touch the Network Setup button.
Touch the Network Locations field and enter the required information.
Touch the Accept button.
• Zone Number
• Zone Name
• Setpoint
• Minimum Setpoint Limit
• Maximum Setpoint Limit
• Power Limit
• Alarm
• Abort
• AMC
• PCM
• Regulation
• Manual Standby Setpoint
• Remote Standby Setpoint
• Manual Boost Setpoint
• Remote Boost Setpoint
• Sensor input
• Slave To
• Output (Zero Cross or Phase Angle)
• Earth Leakage Enable
• Control (PID or ART)
• P (Proportional)
• I (Integral)
• D (Derivative)
Saves the current user interface screen to file in an image file format
(.png).
Description
Network Settings
Altanium Delta3