Safeway water Premium Series Owner's Manual page 8

Brine Tank Set-Up
Premium Brine
Tanks
Note: It is necessary to remove and replace the overflow prevention device to be able to
attach the brine well to the brine tank using the overflow fitting.
Brine tank set-up instructions:
1. Install one of the two caps to cap the bottom of brine well.
2. Remove overflow device to be able to connect brine well to the side of the brine
tank.
3. Connect brine well to brine tank using overflow fitting and reinstall overflow
device.
4. Connect brine line to brine line fitting on the overflow device.
5. Connect brine line to brine line fitting on the valve.
7. Add 6" of water to the brine tank from a sanitary source.
DO NOT ADD SALT AT THIS TIME.
Caution: Push quick connect fittings
collet and again to secure the seal. Use 5/16" drain line tubing up to
20'. Otherwise use ¾" or 1" PVC.
Components
TWICE! Once, to engage the
Brine well & fitting
with overflow
device
8
Overflow
fitting
Brine line
connection