Valve Programming - Safeway water Premium Series Owner's Manual

Valve Programming

Note: Connect MAV valve to master valve and connect master valve
to power source before proceeding.
On master valve display will read:
STEPS:
Once the valve is powered up, the display will read:
"SALT REMAINING
STEPS:
•
Push NEXT
with a default of 1500 GAL showing. (Number will change later.)
•
Press SET
•
Size (select 1" or scroll to 1.25").
•
Press NEXT
Optional types are:
A. Conditioner
B. Iron-Sulfur Zapper
C. Chem-Free filter (two tank)
D. D. Filter (carbon, sediment, neutralizer)
E. Conditioner – Filter (1-PLUS-1 two tank system)
Select "CONDITIONER –
UNKNOWN"
repeatedly until
to make adjustments.
to select type.
FILTER" for 1-PLUS-1 system and press NEXT.
"SALT REMAINING
CAPACITY REMAINING
Reminder:
To get into the settings always
press NEXT
REMAINING
Then press
settings.
13
UNKNOWN".
is displayed
until CAPACITY
is displayed.
SET to adjust