Table of Contents
Advertisement
It is essential to complete a water test, prior to
start-up and valve programming.
Check the following parameters:
•
Hardness
•
pH
•
Iron (well water)
•
Hydrogen Sulfide (you can smell it!)
•
Chlorine
•
TDS
We also recommend you check for obvious signs
of bacteria on well water installations by checking
for slime in back of the toilets.
Note: If bacterial is a concern or known to be
present, sanitize the well and provide continuous
disinfection if required. Additional testing may be
necessary.
Water Test
11
Hide quick links:
Advertisement
Table of Contents
