The cowling and panels shown need to
be removed to perform some of the
maintenance jobs described in this
chapter. Refer to this section each time
the cowling or a panel needs to be re-
moved and installed.
1. Panel A
2. Panel B
3. Panel C
To remove the panel
1. Remove the screws from panel A.
EAU18724
1. Panel A
2. Bolt
3. Screw
2. Pull the panel off as shown.
To install the panel
Place the panel in the original position,
and then install the screws.
7-8
To remove the panel
1. Open the seat. (See page 4-9.)
2. Remove the screws, and then pull
the panel off as shown.
1. Panel B
2. Screw
To install the panel
1. Place the panel in the original po-
sition, and then install the screws.
2. Close the seat.
To remove the panel
1. Open the seat. (See page 4-9.)
2. Remove the screws, and then pull
the panel off as shown.