Replacing A Front Turn Signal Light Bulb - Yamaha Ego Solariz Owner's Manual

NOTICE
_
If a headlight bulb of different watt-
age than recommended is used, it
may cause the battery to discharge
or affect the headlight lighting.
_
6. Install the panel and cowling.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
Front turn signal light bulb
1. Place the motorcycle on the cen-
terstand.
2. Remove panel A and cowling A.
(See page 7-7, 7-6.)
3. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1. Turn signal light bulb socket (
PERIODIC MAINTENANCE AND ADJUSTMENT
ECAU0070
4. Remove the burnt-out bulb by
pulling it out.
5. Insert a new bulb into the socket
by pushing it in until it stops.
NOTICE
_
If a turn signal light bulb of different
wattage than recommended is used,
the turn signal light flashing may be
affected.
_
6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the panel and cowling.
7-29
1. Remove cowling A. (See page
7-8.)
2. Remove the turn signal light bulb
ECAU0080
socket (together with the bulb) by
turning it counterclockwise.
1. Turn signal light bulb socket
3. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
NOTICE
EAU47742
ECAU0091