Troubleshooting - Yamaha Ego Solariz Owner's Manual

1. Rear turn signal light bulb
4. Remove the burnt-out bulb from
the socket by pulling it out.
5. Insert a new bulb into the socket.
NOTICE
6. Install the bulb socket (together
with the bulb) by turning it clock-
wise.
7. Install the panel, and then close
the seat.
Although Yamaha scooters receive a
thorough inspection before shipment
from the factory, trouble may occur
during operation. Any problem in the
fuel, compression, or ignition systems,
for example, can cause poor starting
and loss of power.
The following troubleshooting chart
represents a quick and easy procedure
for checking these vital systems your-
self. However, should your scooter re-
quire any repair, take it to a Yamaha
dealer, whose skilled technicians have
ECAU0081
the necessary tools, experience, and
know-how to service the scooter prop-
erly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
7-31
EAU25862
EWA15142