Removing And Installing The Cowling And Panels - Yamaha Xenter 125 2011 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Removing and installing the
cowling and panels
The cowling and panels shown need
1
to be removed to perform some of the
maintenance jobs described in this
chapter. Refer to this section each
2
time the cowling or a panel needs to
be removed and installed.
3
1
2
4
5
4
6
7
1. Cowling A
2. Panel A
3. Panel B
8 4. Panel C
9
EAU18722
Cowling A
To remove the cowling
1. Remove the cowling screws and
bolts.
1. Cowling A
2. Disconnect the coupler shown,
and then take the cowling off.
3
1. Coupler
EAUT3560
To install the cowling
1. Connect the coupler.
2. Place the cowling in the original
3. Install the cowling screws and
Panel A
To remove the panel
1
1. Luggage holder
2. Panel A
1
1. Remove the luggage holder by
2. Remove the screws, and then
6-7
position.
bolts.
2
removing the screws.
pull the panel outward.
EAU1722A
EAUT3600
1