Removing And Installing The Cowling And Panels - Yamaha BWS CW50 Owner's Manual

Removing and installing the
cowling and panels
The cowling and panels shown above
need to be removed to perform some of
the maintenance jobs described in this
chapter. Refer to this section each time
the cowling or a panel needs to be re-
moved and installed.
Cowling A
To remove the cowling
Remove the screws, and then take the
cowling off.
1
ZAUM0564
1. Cowling A
2. Screw
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU18720 To install the cowling
Place the cowling in the original posi-
tion, and then install the screws.
Panel A
To remove the panel
Remove the screw, and then pull out-
ward on the areas shown.
EAU18790
1
2
ZAUM0565
1. Panel A
2
2. Screw
To install the panel
Place the panel in the original position,
and then install the screw.
Panel B
To remove the panel
NOTE:
EAU19272
Prior to remove the panel B, remove
the panel A.
Remove the screws, and then take the
panel off.
ZAUM0566
1. Screw
2. Panel B
To install the panel
Place the panel in the original position,
and then install the screws.
6-5
EAU19210
1
2
6