System Menu - ADJ ENCORE BURST 100 IP User Instructions

Encore Burst 100 IP
MENU
DMX Address
DMX CH Mode
No DMX State
Dim Modes
LED Refresh Rate
Gamma
Tungsten
Backlight
Display
Display Lock
Service Passcode = 50
Manual Control
Fixture Life Time
Total LED Time
Information
Fixture Temps
DMX Values
Software Version
*Current Maximum Temperature - Maximum xture temp. that has been recorded, before reset and after reset.
**Maximum Temperature - Overall maximum xture temp. that has been recorded. (Not Resettable)
ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 12
SUBMENU
001-512
1Ch/2Ch/3Ch/4Ch
Hold Last/Blackout/Manual
Standard/Stage/TV/Architectural/Theatre/Stage2
Dim Speed 0.1S~10S
900Hz/1000Hz/1100Hz/1200Hz/1300Hz/
1400Hz/1500Hz/6000Hz/25000Hz
1.0/2.0/2.2/2.4/2.6/2.8
ON/OFF
ON/OFF
ON/OFF
E ect Adjust (Calibration) - WW LED 000 - 255
Factory Restore - Password = 11
WW LED 000 - 255
Strobe 000 - 255
Power On Time - XXXXXX Hours
P-On Time-R - XXXXXX Hours
P-On Time Reset - Password = 50
LED On Time - XXXXXX Hours
LED On Time-R - XXXXXX Hours
LED Time Reset - Password = 50
Current - XXX˚
Max Resettable - XXX˚
Max Not Resettable - XXX˚
Rst Temp History - Password = 50
WW LED 000 - 255
Strobe 000 - 255
X.X
OPTIONS

System Menu

DESCRIPTION
DMX Addressing
DMX Channel Mode
Selection
DMX Lost Status
Dimming Curve Modes
Dimming Speed
LED Refresh Setting
Gamma Brightness
Tungsten E ect
Backlight Control
Display Control Lock
Calibration
Factory Settings
Manual Control
Total Running Time
(Not Resettable)
Total Running Time
(Resettable)
Reset Total Running Time
Total LED On Running
Time (Not Resettable)
LED On Running Time
(Resettable)
Reset LED Running Time
Current Temperature
Maximum Temperature*
Reached (Resettable)
Maximum Temperature**
Reached (Not Resettable)
Reset Temperature
Current DMX Values
Current Software Version