Table of Contents
Advertisement
Power supply section
(1)
AC input socket
(2)
GND (ground) terminal
Digital video input/output section
(3)
SD SERIAL IN connector
(BNCx1)
(4)
HD SERIAL IN connector
(BNCx1)
(5)
SD SERIAL OUT 1,2
connectors (BNCx2)
(6)
HD SERIAL OUT 1,2
connectors (BNCx2)
Reference input/output section
(7)
EXT SYNC IN
connectors (BNCx2)
(8)
LTC IN connector
(BNCx1)
(9)
GENLOCK SYNC OUT
connector (BNCx1)
(10)
LTC OUT connector
(BNCx1)
Rear Panel
This is connected to the power outlet using the supplied cable.
It is recommended that this unit be grounded when connected to
other units.
SDTV serial digital signals are input to this connector.
HDTV serial digital signals are input to this connector.
SD serial digital signals are output from these connectors.
HD serial digital signals are output from these connectors.
Tri-level/bi-level sync signals or black burst signal are input to
these connectors as the reference signal. A loop-through format
and a 75Ω termination switch are provided.
The time code signals are input to this connector.
The tri-level/bi-level sync signals, for genlocking external inputs,
are output from this connector.
The time code signals are output from this connector.
7
Advertisement
Table of Contents
