Table of Contents
Advertisement
Diagnostics Menu
The DIAGNOSTICS menu is activated by pushing the DIAG button on the UFC front panel. This menu shows any
errors or warnings that have been detected by the system. Three submenus are available from the top menu: ALL,
MONITORED & TRIGGERED.
DIAG
D I A G
M O N I T ' D E R R O R S : 2 9
A L L ↓
F1
F1 – Opens up the ALL submenu to show all possible error messages.
F2 – Opens up the MONITORED submenu to show which error conditions are being monitored.
F3 – Opens up the TRIGGERED submenu to show all monitored errors that have been detected.
F4 – Acknowledges all detected errors and resets their triggers.
F5 – Touch this button to monitor all error conditions. Hold this button in until it flashes to mask all error detection.
ALL, MONITORED, TRIGGERED
The same functions are available under each submenu. The knob is used to scroll through all error conditions that
are applicable to the respective submenu.
D I A G > > T R I G G E R E D
[ D I O - 1 ] N O S D D I G V I D E O I N P U T
( M O N I T ' D )
M A S K
F1
F1 – On the ALL submenu, this toggles between masking or monitoring the displayed error condition. Only the
mask option is available on the other two submenus.
F3 – Selects between a level trigger or a transition trigger for the displayed error condition. Transition triggers are
useful for detecting error conditions that only occur for a brief period of time.
F5 – Resets the transition trigger for the displayed error condition. The error condition must be cleared in order to
retrigger.
Note: Masking and subsequently monitoring an error will automatically reset its trigger. The error condition does
not have to be removed first.
M O N ' D ↓
T R I G ' D ↓ R E T R I G M O N / M A S K
F2
F3
( T R A N S )
T R G T Y P E
F2
F3
F4
F5
[ f a u l t ]
( T R I G ' D )
R E T R I G
F4
F5
21
EXIT
EXIT
Advertisement
Table of Contents
