Reload Settings; System Restart; Event Log - CNET CWR-901 User Manual

- Remote Management IP: Enter the remote management IP of the wireless router.
- Remote Management Netmask: Enter the remote management netmask of this
router.
- Remote Management Port: Define the remote management port of this wireless
router.
- Ping from WAN side: Allow users to ping this wireless router from WAN side. It is
turned on by default and could be turned off if the enable box is unchecked..
- Save: Save the settings.
- Help: To request help information.

3.9.7 Reload Settings

You can reset the wireless router back to its default settings by clicking on the Factory Default
button.
Note: you can also hold down the reset button on the wireless router's back panel for more
than 5 seconds to reset it back to its default settings.
- Factory Default: Start to reload the default settings.
- Help: To request help information.

3.9.8 System Restart

In some special cases, you may restart this wireless router manually without unplugging the power
cable. Click on the System Restart button to reset the wireless router.
System Restart: Start to reset the system.
-
- Help: To request help information.

3.10 Event Log

This wireless router supports five types of Log messages: System Log, ACL Log, URL filter, DoS
Log and New NAPT Log. This data is useful for monitoring and troubleshooting the network.
51