TABLE OF CONTENTS SAFETY PRECAUTION ....3 - Precautions In Installing the Product .....3 - Precautions to the AC Adapter and Electrical Power ..................5 - Precautions In Using the Product ......8 - Mounting on a Wall ............9 LICENSES ........10 ASSEMBLY AND PREPARATION 11 - Parts and Buttons ............12 - Installing in Portrait Position ........12 - Installing the Wall Mount Plate ......13...
WARNING - This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. SAFETY PRECAUTION Please read these safety precautions carefully before using the product. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged.
If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with LG or a qualified installer before installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a long period of time (airport and train station).
• - If loosely connected, the poor connection may cause a fire or electric shock. Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc. • - The use of non-approved products may cause a fire or electric shock.
Fix the power cable completely. • - If the power cable is not fixed completely, a fire can break out. • Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is connected to the input terminal on the wall.
WARNING Make sure to turn off the product. • - You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. Make sure the panel faces forward and hold it with both hands to move.
Precautions In Using the Product WARNING Do not disassemble, repair or modify the product at your own discretion. • - Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. •...
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much • moisture may cause staining. CHEMICALS WATER • Do not use products using high voltage around the Monitor. (e.g., a bug zapper) - Monitor may have malfunction as its electrical shock.
LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
The warranty will not cover any damages caused by using the product in an excessively dusty environment. • SuperSign Software & Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model.
Parts and Buttons Installing in Portrait Position The image may differ depending on the model. The Device can be installed in portrait position. • • Using the Kensington lock (This feature is available only on certain models.) The Kensington security system connector is located on the back of the Device.
If you use longer screws than the standard length, it may damage the inside of the Device. A non-VESA standard screw may damage the product and cause the Device to fall. LG Electronics is not liable for any accidents relating to the use of non-standard screws.
Wall Mount (A x B) • CAUTION • Unplug the power cord before moving or installing the Device to avoid electric shock. Installing the Device on the ceiling or on a slanted wall • may result in the Device falling off, which could lead to injury.
CONNECT A USB STORAGE DEVICE Connect a USB storage device, such as a USB flash memory, to the display device to use multimedia features. CAUTION • Do not turn the Device off or remove the USB storage device when the multimedia screen is activated. This may cause the loss of a file or damage to a USB storage device.
Tips for Using USB Storage Devices Only USB storage devices are recognized. • • The USB may not work properly when it is connected through a USB hub. • A USB storage device using an automatic recognition program may not be recognized. •...
REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
Selects the Picture Mode. (HOME) Activates the Launcher. Enters the White Balance menu. (SETTINGS) Accesses the main menus or saves your input and exit menus. SuperSign menu key. Navigation Buttons Scrolls through menus or options. Selects menus or options and confirms your input. (BACK) Allows you to move back one step in the user interaction function.
TROUBLESHOOTING No image is displayed. Problem Action Is the product power cord connected? • Check if the power cord is correctly plugged into the power outlet. Image sticking occurs on the product. Problem Action Image sticking occurs when the product If you display a fixed image for a long time, the pixels may be damaged •...
The operation does not work normally. Problem Action The power suddenly turned off. • Has the Timer been set? • Check the power control settings. Power supply is interrupted. The Device will not turn on. Try turning the power on after disconnecting the AC adapter and •...
Change the image at the same time interval. CAUTION • Displaying a still image for a long time may cause damage to the screen, resulting in a ghost image. Damage incurred as a result of this is not covered by the product warranty.
Storage Humidity 5 % to 85 % Audio RMS Audio Output 0.64 W Speaker Impedance 8 Ω 10SE3E LCD screen Pixel pitch 0.1695 mm (H) x 0.1695 mm (V) Power Rated power AC 100-240 V ~ 50/60 Hz 1.3 A Power consumption On Mode: 10 W (Typ.)
HDMI (PC) Support mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 640 x 480 31.469 59.94 800 x 600 37.879 60.317 1024 x 768 48.363 60.0 1280 x 720 44.772 59.855 1366 x 768 47.7 1280 x 800 49.309 59.91 1280 x 1024 63.981 60.02...
Wireless module(LGSBW41)Specifications Wireless LAN (IEEE 802.11a/b/g/n) Frequency range (MHz) Output power (Max.) 2400 to 2483.5 16 dBm 5150 to 5250 16 dBm 5725 to 5850 (Not for EU) 11.5 dBm • As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
The product label contains necessary information for after-service. Please note that a momentary noise during power on/off is not abnormal and does not mean a device Model malfunction. Serial No.