OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. This product is primarily designed for the display and reception of audio-visual signals. 10SM3TB www.lg.com...
Table of contents SAFETY PRECAUTIONS Precautions When Installing the Product Precautions to the AC Adapter and Power Precautions When Moving the Product Precautions When Using the Product Precautions When Cleaning the Product Precautions When Experiencing Image Sticking ASSEMBLY AND PREPARATION Parts and Buttons Installing in Portrait Position Installing the Wall Mount Plate...
Safety precautions Do not install the product in a damp or dusty area. The following precautions exist to prevent accidental • This may create a fire hazard damage or personal injury by helping users to handle or result in electric shock or the product safely and correctly.
Keep the anti-moisture material or vinyl film used for packaging the product out of reach of children. • If swallowed by mistake, force it to be vomited and visit the nearest hospital. Do not use the product in a damp place such as a bathroom where it is likely to get wet.
CAUTION If you are using an outdoor antenna, please install it away Failure to observe these instructions may result in from electrical wires to make minor injury or damage to the product. sure it does not touch any Ensure that the product is nearby wires even if it falls installed a certain distance (at down due to heavy wind.
Precautions to the AC Adapter • Do not install the product in an area with poor ventilation (e.g.on a bookshelf or in a closet) or and Power outside, and avoid placing on cushions or carpets. • In addition, do not install it in close proximity to hot WARNING objects, such as lights.
AC Be sure to use power cords adapter. and AC adapters provided or • This may cause a fire or approved by LG Electronics, electric shock. Inc. To turn off the main power, • The use of non-approved...
Precautions When Moving the CAUTION Product Failure to observe these instructions may result in minor injury or damage to the product. WARNING Do not remove the power cord when the product is in use. Failure to observe these instructions may result in •...
Precautions When Using the In the event that no image Product appears on the screen or no sound is heard, stop using the product. Switch it off WARNING immediately, unplug it from Failure to observe these instructions may result in the power outlet and contact the service center.
CAUTION Since the LCD requires high technology consisting of Failure to observe these instructions may result in hundreds of pixels, when minor injury or damage to the product. using the product, pixilated Do not use or store the spots (red, green, white or product near inflammables.
Precautions When Cleaning the CAUTION Product Failure to observe these instructions may result in minor injury or damage to the product. WARNING To clean the product, unplug the power cord and wipe it Failure to observe these instructions may result in gently with a soft cloth.
Precautions When Experiencing Image Sticking • Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image. • Most third-party products have the same issue. Damage resulting from long-term static images is not covered by product warranty.
ASSEMBLY AND PREPARATION CAUTION • Always use genuine components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of counterfeit components. NOTE • The warranty will not cover any damages caused by using the product in an excessively dusty environment.
Parts and Buttons Installing in Portrait Position • The image may differ depending on the model. • The Device can be installed in portrait position. Using the Kensington lock (This feature is available only on certain models.) The Kensington security system connector is located on the back of the Device.
If you use longer screws than the standard length, it may damage the inside of the Device. A non-VESA standard screw may damage the product and cause the Device to fall. LG Electronics is not liable for any accidents relating to the use of non-standard screws.
• Wall Mount (A x B) CAUTION • Unplug the power cord before moving or installing the Device to avoid electric shock. • Installing the Device on the ceiling or on a slanted wall may result in the Device falling off, which could lead to injury.
Connect a USB/Micro SD storage device Connect a USB storage device, such as a USB flash memory, Micro SD storage device, to the display device to use multimedia features. CAUTION • Do not turn the Device off or remove the USB storage device when the multimedia screen is activated. This may cause the loss of a file or damage to a USB storage device.
Tips for Using USB/Micro SD Storage Devices • Only USB storage devices are recognized. • The USB may not work properly when it is connected through a USB hub. • A USB storage device using an automatic recognition program may not be recognized. •...
Supported Multimedia Files CAUTION • Some files may not be played if there is no supporting codec. Supported Video Codecs • H.263, H.264 AVC, MPEG-4 SP, VP8 Supported Music Codecs • AAC LC/LTP, HE-AACv1(AAC+), HE-AACv2(enhanced AAC+), AAC ELD (enhanced low delay AAC), AMR-NB, AMR-WB, FLAC, MP3, MIDI, Ogg Vorbis, PCM/WAVE Supported Video Codecs •...
TROUBLESHOOTING No image is displayed. Problem Action Is the product power cord connected? • Check if the power cord is correctly plugged into the power outlet. The screen will not turn on. • Press and hold the power button for more than a second. Image sticking occurs on the product.
The operation does not work normally. Problem Action The power suddenly turned off. • Has the Timer been set? • Check the power control settings. Power supply is interrupted. Touch does not work at all. • This may happen when using an uncertified AC adapter. Make sure you use the adapter provided at the time of purchasing the product.
Change the image at the same time interval. CAUTION • Displaying a still image for a long time may cause damage to the screen, resulting in a ghost image. Damage incurred as a result of this is not covered by the product warranty.
PRODUCT SPECIFICATIONS Specifications are subject to change without notice. LCD screen Screen Type Thin Film Transistor (TFT) Liquid Crystal Display (LCD) Screen 1280 x 800 @ 60 Hz Input/output ports LAN/PoE (802.3at Type 1), DC-IN (Adaptor 19 V ), USB IN, Micro SD Environmental Operating Temperature...
10SM3TB LCD screen Pixel pitch 0.1695 mm (H) x 0.1695 mm (V) Power Power consumption On Mode: 10 W (Typ.) Off Mode: ≤ 1.0 W Dimensions (Width x Head 245.6 mm x 164.2 mm x 29.7 mm / 0.69 kg...
Wireless module(LGSBW41)Specifications Wireless LAN Bluetooth Standard IEEE 802.11a/b/g/n Standard Bluetooth Version 4.0 Frequency 2400 to 2483.5 Frequency 2400 to 2483.5 range range 5150 to 5250 (MHz) (MHz) 5725 to 5850 (for Non EU) • Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table.
WARNING -This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. The product label contains necessary information for after-service. Please note that a momentary noise during power on/off is not abnormal and does not mean a Model device malfunction.