How To Set The Timeout Lock In Admin Mode - iStorage Datashur Personal2 User Manual

19. How to set the Timeout Lock in Admin mode

To protect against unauthorised access when the datAshur Personal
datAshur Personal can be set to automatically lock after a pre-set amount of time.
2
In its default state, the datAshur Personal
activate (lock) anywhere between 1 and 99 minutes. Admin Timeout Lock settings will override User settings.
To set the Timeout Lock please follow steps in the table below.
Caution: Entering the Admin PIN to access a locked drive will clear the User PIN. For security reasons, we
highly recommend that a new User PIN be created immediately once the drive has been unlocked
using the Admin PIN. Refer to section 13 on page 11.
Instructions
1. Unlock the datAshur Personal
2. Press the KEY button 3 times
(triple click)
3. Within 10 seconds begin to press button number 8
(Tuv) followed by the number 5 (jkL) button - (85)
4. Press KEY button once
5. Within 10 seconds begin to enter the length of User
Timeout in 2 digits:
00 = 0 minutes (default)
01 = 1 minute
99 = 99 minutes etc
6. Press the Key button once
Timeout Lock feature is turned off. The Timeout Lock feature can be set to
2
with Admin PIN
2
www.istorage-uk.com www.istorage-uk.com
is connected to a host and unattended, the
2
LED LED State
Red solid LED followed by a flickering
LED indicating successful Admin PIN entry
Green and Blue
&
awaiting new instructions in OPTIONS mode.
Green and Blue
&
together
Blinking Green
Green LED continues to blink
LED changes to flickering Green. Timeout Lock
has been set. Admin can override USER Timeout
Lock
D A T A A S S U R E D
Green
LED's flicker together
LED's continue to flicker
LED
#15 #15