Configuration Transfers; Loading A Configuration From An Inverter - Toshiba PWU003Z Instruction Manual

5. Configuration transfers

5.1. Loading a configuration from an inverter

This procedure allows the user to retrieve a configuration file ("LOADFRMD00.CFG" to "LOADFRMD99.CFG") from an
inverter and load it onto the Parameter writer's SD card.
STEP
• Turn the Parameter writer on using the ON/OFF button "F" (see section 3.2).
• Connect the Parameter writer to the inverter using the RJ45 cable (see section 4.2).
• Press "ENT" when the screen displays "Main menu / Action".
1
• Select the "Action Config / Device -> MLD" menu using the arrow keys and press "ENT".
• "Device -> MLD / LoadFromDevicexx" appears on the screen. Press ENT until the transfer
starts.
• "Load Config / Successful" : The configuration has been loaded successfully onto the
Parameter writer;
2
disconnect the RJ45 cable from the inverter. The inverter configuration file ("filexx.CFG") is
now loaded onto the Parameter writer's SD card.
• Pressing "ENT" returns the user to the "Action Config" menu.
Note :
•If a configuration file has already been loaded 100 files onto the Parameter writer's SD card, it will be overwritten by
the new configuration file from 101 files. Renaming the file on the SD card (via a PC connection) means that the user
can store more than one file on the SD card. ( "file.CFG" can be renamed as "file1.CFG" )
Main menu
Action
ENT
Action Config
MLD -> Device
Action Config
Device -> MLD
ENT
Action Config
XXXXXXXX
Device -> MLD
LoadFrmDxx.cfg
ENT
LoadFrmDxx.cfg
ENT <<<<
LoadFrmDxx.cfg
<<<<<<<<
LoadFrmDxx.cfg
<<<<<<<<<<<<
Load config
Successful
13
1
2
Actions
E6581680