Transferring The Configuration To More Than One Inverter Using Quick Store - Toshiba PWU003Z Instruction Manual

5.3. Transferring the configuration to more than one inverter using Quick Store

This procedure describes how to use the Quick Store function (see section 6.4) to duplicate configurations.
The user must already have:
-Loaded the inverter configuration file (*.CFG) onto the Parameter writer (see section
OR
-Generated the configuration file using PCM software and loaded this file onto the Parameter writer
(filename1, filename 2, etc.)
STEP
• Turn the Parameter writer on using the ON/OFF button "F" (see section 3.2).
• Connect the Parameter writer to the inverter using the RJ45 cable (see section 4.2).
1
• Press "ENT" when the screen displays "Main menu / Action".
• Press "ENT" when the screen displays "Action Config / MLD -> Device".
• Select the file to be transferred using the arrow keys and press "ENT" to start the transfer. If
2
no inverter is connected, a message "No device / connected" appears on the screen
(see section 6.7).
• The configuration has been transferred successfully from the Parameter writer; disconnect the
RJ45 cable from the inverter.
• Connect the Parameter writer to the next inverter, then press the Quick Store key
3
• "Store Config Successful" : The configuration has been loaded successfully onto the
second inverter; remove the RJ45 cable from the inverter.
• This action can be carried out as many times as necessary.
Note :
• Keep on pushing ESC key if the process of searching communication mode is canceled.
• Display is changed faster by keeping on pushing
Transfer
or key.
15
E6581680
5.1 )