Description - Toshiba PWU003Z Instruction Manual

3.2. Description

Letter
A Mini-B USB connector
RJ 45 connector
B
RJ11 connector with label cover For factory use only.
C
SD card slot
D
Battery compartment
E
Power ON/OFF button
F
Quick Store key
G
Screen
H
ESC key
I
ENT key
J
Up arrow key
K
Down arrow key
L
Holes
M
B
H
TOSHIBA
F
J
ENT
K
A
G
E
Figure 2
Description
The connection between the Parameter writer (USB
Mini-B type) and the PC (USB type A) is via a 1 m (3.28
feet) USB type A to Mini-B cable.
The connection between the Parameter writer and the
inverter is via a RJ45 cable to load and transfer
configuration files or updated application.
The SD card receives and stores the files. One SD card is
supplied with the Parameter writer.
It can take 4 normal batteries and rechargeable batteries.
Press for 2 seconds to turn the tool on or off.
Press this key to transfer data from the Parameter writer
to the inverter after an initial transfer in Quick store mode.
The screen comprises 2 lines of 16 characters.
Returns to the previous screen.
Confirms the parameter selection or cancels messages.
For menu navigation.
For menu navigation.
For wrist strap
C
I
ESC
D
L
M
Comments
9
E6581680