Cisco MDS 9000 Series Configuration Manual page 261

Configuring Port Security
switch# clear port-security database auto-learn vsan 1
Note The clear port-security database auto-learn andclear port-security statistics commands are only relevant
to the local switch and do not acquire locks. Also, learned entries are only local to the switch and do not
participate in distribution.
Use the port-security clear vsan command to clear the pending session in the VSAN from any switch in the
VSAN.
switch# clear port-security session vsan 5
Displaying Port Security Configuration
The show port-security database commands display the configured port security information (see the
following examples).
Displays the Contents of the Port Security Configuration Database
switch# show port-security database
---------------------------------------------------------------------------------------
VSAN
----------------------------------------------------------------------------------------
1
1
2
3
[Total 4 entries]
You can optionally specify a fWWN and a VSAN, or an interface and a VSAN in the show
port-security command to view the output of the activated port security (see Displays the Port
Security Configuration Database in VSAN 1 ).
Displays the Port Security Configuration Database in VSAN 1
switch# show port-security database vsan 1
--------------------------------------------------------------------------------
Vsan
--------------------------------------------------------------------------------
1
1
[Total 2 entries]
Displays the Activated Database
switch# show port-security database active
----------------------------------------------------------------------------------------
Logging-in Entity
21:00:00:e0:8b:06:d9:1d(pwwn)
50:06:04:82:bc:01:c3:84(pwwn)
20:00:00:05:30:00:95:df(swwn)
20:00:00:05:30:00:95:de(swwn)
Logging-in Entity
*
20:11:00:33:11:00:2a:4a(pwwn)
Logging-in Point
20:0d:00:05:30:00:95:de(fc1/13)
20:0c:00:05:30:00:95:de(fc1/12)
20:0c:00:05:30:00:95:de(port-channel 128)
20:01:00:05:30:00:95:de(fc1/1)
Logging-in Point
20:85:00:44:22:00:4a:9e (fc3/5)
20:81:00:44:22:00:4a:9e (fc3/1)
Cisco MDS 9000 Series Security Configuration Guide, Release 8.x
Displaying Port Security Configuration
(Interface)
(Interface)
243