Cisco MDS 9000 Series Configuration Manual page 264

Default Settings
1
2
[Total 2 entries]
The show port-security command issued with the last number option displays only the specified
number of entries that appear first.
Default Settings
The following table lists the default settings for all port security features in any switch.
Table 23: Default Security Settings
Parameters
Auto-learn
Port security
Distribution
Cisco MDS 9000 Series Security Configuration Guide, Release 8.x
246
fc1/12 50:06:04:82:bc:01:c3:84(pwwn)
50:06:04:82:bc:01:c3:84(nwwn)
port-channel 1 20:00:00:05:30:00:95:de(swwn)
Default
Enabled if port security is enabled.
Disabled
Disabled.
Note Enabling distribution enables it on all VSANs in
the switch.
Configuring Port Security
Jul 9 08:32:20 2003
Jul 9 08:32:40 2003
[1]
[1]