Cisco MDS 9000 Series Configuration Manual page 263

Configuring Port Security
Displays the Interface Port Information in VSAN 2
switch# show port-security database interface fc 1/1 vsan 2
20:00:00:0c:88:00:4a:e2(swwn)
The port security statistics are constantly updated and available at any time (see Displays the Port
Security Statistics).
Displays the Port Security Statistics
switch# show port-security statistics
Statistics For VSAN: 1
------------------------
Number of pWWN permit: 2
Number of nWWN permit: 2
Number of sWWN permit: 2
Number of pWWN deny
Number of nWWN deny
Number of sWWN deny
Total Logins permitted
Total Logins denied
Statistics For VSAN: 2
------------------------
Number of pWWN permit: 0
Number of nWWN permit: 0
Number of sWWN permit: 2
Number of pWWN deny
Number of nWWN deny
Number of sWWN deny
...
To verify the status of the active database and the auto-learning configuration, use the show
port-security status command (see Displays the Port Security Status).
Displays the Port Security Status
switch# show port-security status
Fabric Distribution Enabled
VSAN 1 :No Active database, learning is disabled, Session Lock Taken
VSAN 2 :No Active database, learning is disabled, Session Lock Taken
...
The show port-security command displays the previous 100 violations by default (see Displays
the Violations in the Port Security Database).
Displays the Violations in the Port Security Database
switch# show port-security violations
------------------------------------------------------------------------------------------
VSAN
------------------------------------------------------------------------------------------
1
: 0
: 0
: 0
: 4
: 0
: 0
: 0
: 0
Interface Logging-in Entity
fc1/13 21:00:00:e0:8b:06:d9:1d(pwwn)
20:00:00:e0:8b:06:d9:1d(nwwn)
Cisco MDS 9000 Series Security Configuration Guide, Release 8.x
Displaying Port Security Configuration
Last-Time [Repeat count]
Jul 9 08:32:20 2003 [20]
245