Cisco MDS 9000 Series Configuration Manual page 272

NPV Mode
Command
flex-attach
hardware
hw-module
interface
ip
ipv6
license
line
logging
module
no
npv
ntp
password
port-group-monitor
port-monitor
power
poweroff
radius
radius-server
rate-mode
rmon
role
snmp
snmp-server
span
ssh
switchname
Cisco MDS 9000 Series Interfaces Configuration Guide, Release 8.x
254
Description
Configure Flex Attach.
Hardware Internal Information.
Enable/Disable OBFL information.
Configure interfaces.
Configure IP features.
Configure IPv6 features.
Modify license features.
Configure a terminal line.
Modify message logging facilities.
Configure for module.
Negate a command or set its defaults.
Config commands for FC N_port Virtualizer.
NTP Configuration.
Password for the user
Configure port group monitor.
Configure port monitor.
Configure power supply.
Power off a module in the switch.
Configure RADIUS configuration.
Configure RADIUS related parameters.
Configure rate mode oversubscription limit.
Remote Monitoring.
Configure roles.
Configure snmp.
Configure snmp server.
Enter SPAN configuration mode.
SSH to another system.
Configure system's network name.
Configuring N Port Virtualization