Cisco MDS 9000 Series Configuration Manual page 104

Port Index Limitations
switch# show module
Mod Ports
--- -----
5 32
7 0
13 48
Mod Sw
--- --------------
5 5.2(2)
7 5.2(2)
13 5.2(2)
Mod MAC-Address(es)
--- --------------------------------------
5 68-ef-bd-a8-45-cc to 68-ef-bd-a8-45-d0
7 00-24-c4-60-00-f8 to 00-24-c4-60-00-fc
13 68-ef-bd-a8-40-00 to 68-ef-bd-a8-40-04
Xbar Ports
--- -----
1 0
2 0
Xbar Sw
--- --------------
1 NA
2 NA
Xbar MAC-Address(es)
--- --------------------------------------
1 NA
2 NA
* this terminal session
The running configuration is updated when modules are installed. If you save the running configuration to
the startup configuration (using the copy running-config startup-config command), during reboot the switch
powers up the same set of modules as before the reboot regardless of the sequence in which the modules
initialize. You can use the show port index-allocation startup command to display the index allocation the
switch uses at startup.
switch# show port index-allocation startup
Startup module index distribution:
------------------------------------------------------+
Slot | Allowed |
|
-----|---------|-------|------------------------------|
1 |
2 |
3 |
4 |
SUP | 253-255 |
Note
The output of the show port index-allocation startup command does not display anything in the Allowed
range column because the command extracts the indices from the persistent storage service (PSS) and displaying
an allowed range for startup indices is meaningless.
If a module fails to power up, you can use the show module slot recovery-steps command to display the
reason.
Cisco MDS 9000 Series Interfaces Configuration Guide, Release 8.x
86
Module-Type
----------------------------------- ------------------ ----------
1/2/4/8/10 Gbps Advanced FC Module
Supervisor/Fabric-2
1/2/4/8/10 Gbps Advanced FC Module
Hw World-Wide-Name(s) (WWN)
------ --------------------------------------------------
0.207 21:01:00:0d:ec:b7:28:c0 to 21:20:00:0d:ec:b7:28:c0
1.9 --
0.212 23:01:00:0d:ec:b7:28:c0 to 23:30:00:0d:ec:b7:28:c0
Module-Type
----------------------------------- ------------------ ----------
Fabric Module 3
Fabric Module 3
Hw World-Wide-Name(s) (WWN)
------ --------------------------------------------------
0.4 --
0.4 --
Alloted indices info
range | Total |
----- | 34 | 0-31,80-81
----- | 32 | 32-63
----- | 16 | 64-79
----- | 48 | 96-127,224-239
3 | 253-255
Model
DS-X9232-256K9
DS-X9530-SF2-K9
DS-X9248-256K9
Serial-Num
----------
JAF1450CHQT
JAE141502L2
JAF1450BMBP
Model
DS-13SLT-FAB3
DS-13SLT-FAB3
Serial-Num
----------
JAF1451AMHG
JAF1451AMHN
|
Index values |
|
|
|(Slot 1 shares 80-81)
|
|
Configuring Fibre Channel Interfaces
Status
ok
active *
ok
Status
ok
ok