Usb / Lsb / Time Set Button - C. Crane CC Skywave SSB Instruction Manual

Radio Operation
14
13
Press the ALARM button again to adjust the minutes.
When finished, press the ALARM button again to
confirm. To disable alarm, press the ALARM
button for three seconds. By default, the alarm will
wake you with a beep. To wake to a radio station,
press the #5 button during alarm setup. A speaker
icon displays on the screen indicating that the
alarm will wake to the previous radio station played.
It is best to check the station frequency and adjust
the volume level to your wake-up preference before
going to sleep to ensure that is just how you want it.
When the alarm sounds, press the power button to
turn the alarm o , or press any other button to sleep
for 10 more minutes.

14. USB / LSB / Time Set Button

Change between Upper (USB) and Lower (LSB)
sideband while in SSB mode. Since there are two
sidebands to each frequency you can choose
which sideband you want. There may be two
di erent broadcast on the same frequency with
SSB so you must choose which to listen to with
Page 16