Radio Operation; Power Button / Sleep Timer; Up And Down Tuning Buttons; Memory Preset Buttons - C. Crane CC Skywave SSB Instruction Manual

Radio Operation

1. Power button / Sleep Timer

To turn the radio "ON", press the red button. To use the Sleep Timer, press and hold the red button while the
radio is o . The display will cycle through minutes 120, 90, 60, 45, 30, 15, and OFF. Release the power button to
activate the sleep setting you desire. The radio will remember your last Sleep Timer setting for the next time
you activate it. The Sleep Timer will automatically shut o the radio after the set amount of time expires.

2. Up and Down Tuning Buttons

1
Press once quickly to tune to the next frequency
increment. Press and hold for 2 seconds to
automatically tune to the next strong station. Hold
continuously to cycle through the whole band.

3. Memory Preset Buttons 0-9

Save your favorite stations to memory buttons. To
save a station, press and hold any memory button
for 2 seconds while the station is playing. To play a
saved station, press the same button once quickly.
2
Note: The CC Skywave SSB is a "smart" radio and will
remember current settings when a station is preset into
memory. The current settings that will be saved with your
station are: 1. Stereo or Mono selection on FM.
3
2. Bandwidth selection on AM, Shortwave, or Air
bands. 3. Tone settings.
Page 10