Charging The Battery - Maxcom MM920 User Manual

After the battery is in position, make sure the
•
battery cover seal is in position as well. Then,
put the battery cover on the phone and gently
press on the edges. Use the screwdriver to
screw four bolts on the

Charging the Battery

Important! Only the battery included in the set should be
used. Using other batteries might damage the phone and
shall void warranty.
Never connect the charger while the back cover is
removed.
To charge the phone:
1. Use your fingernail to lift away the cover over
USB/headphones port.
2. Plug the charger into a power outlet.
cover.
13