Maxcom MM920 User Manual page 10

Prior to inserting the SIM Card, make sure the phone is
switched off, and the is battery removed. Charger should
be unplugged. To insert the SIM Card, first remove the
battery as shown in the drawings and instructions:
With the phone switched off, place the phone with
•
its screen face down, and then use a screwdriver
to unscrew four bolts (if they are in place), and
gently remove the battery cover by lifting it up from
its bottom.
Remove the battery by lifting it up with your
•
fingernail from the bottom of the phone.
Release the SIM Card slot tray by sliding it
•
upwards, and then open it. Insert the SIM Card
to the slot located on the left edge of the phone,
with metal contacts facing down. Make sure to
position the notch of the card going down of the
phone.
10