Removing And Installing The Hard Disk Of The Bi45/Fi45 - Siemens SIMATIC PC BI45 Technical Description

System Unit
1.4.11

Removing and Installing the Hard Disk of the BI45/FI45

To install the drive, proceed in reverse order.
Figure 1-16Removing the Hard Disk Support
1-26
If you are using the BI45, remove the floppy disk/CD-ROM drive support
as described in Section 1.4.9.
If you are using the FI45, lower the floppy disk/CD-ROM drive support to
one side of the system unit as described in Section 1.4.10.
Release the four screws with which the hard disk support is fastened to
the system unit.
Remove the connecting cables and lift the support carefully out of the
system unit.
Release the four screws with which the hard disk is fastened to the
vibration-damped part of the support.
Take the hard disk out out of the support.
Hard disk support
Fastening screws for
hard disk support
SIMATIC PC BI45/FI45 PII, Technical Description
C79000-G7076-C794-03