Opening And Closing The System Unit Of The Bi45 - Siemens SIMATIC PC BI45 Technical Description

System Unit
1.4.1

Opening and Closing the System Unit of the BI45

Fastening screws
Figure 1-5 Opening the System Unit of the BI45
1-10
Close the application you are using.
Remove the diskette or CD-ROM from the drive.
Pull out the power supply connector.
Remove the PC from its support.
Release the seven screws on the cover of the unit.
Cover of the unit
SIMATIC PC BI45/FI45 PII, Technical Description
C79000-G7076-C794-03