Tack Screen - Orion c Series User Manual

Tack Screen

1 . Top Navigation Bar: Allows the user
to change screens .
1 . Arc Button: Switches the Main
Screen to the Arc Screen
2 . Tack Button: Switches the Main
Screen to the Tack Screen
3 . Save Load Button: Brings up the
Save Load Window
4 . Settings Button: Switches the
Main Screen to the Settings
Screen
2 . Energy Selection Area: Allows
the user to customize the energy
settings of the welder .
1 . Minus Button: Lowers the energy in increments . (Hold to continue lowering the energy)
2 . Energy Slider: Allows the user to quickly switch energies .
3 . Energy Display: Shows the user the current energy value .
4 . Plus Button: Increases the energy in increments . (Hold to continue increasing the energy)
3 . Pre-Weld Delay Buttons: Allows the user to change the delay before a tack occurs .
1 . Short Button: Changes the Pre-Weld Delay to a quarter of a second .
2 . Medium Button: Changes the Pre-Weld Delay to a half second .
3 . Long Button: Changes the Pre-Weld Delay to a full second .
4 . Options Buttons
1 . Play/Pause Button: Switches the welder from a ready state to a pause state .
2 . Undo Button: Allows the user to undo the last change they have made .
3 . Redo Button: Allows the user to redo the last change they have undone .
4 . Reset Button: Allows the user to reset the tack settings to their factory default settings .
5 . Trigger Buttons: Allows the user to change the way the welder triggers a weld .
1 . Touch Detect Button: Changes the welder to start a weld when it detects the positive and negative terminal
connection .
2 . Foot Pedal Button: Changes the welder to start a weld when it detect that the foot pedal has been pressed .
OrionWelders.com 13