Arc Screen - Orion c Series User Manual

c Series User Manual
Chapter 2: The Touch Screen Interface
Below is an explanation of all the various buttons and options found on the Orion user interface .

Arc Screen

1 . Top Navigation Bar: Allows the user
to change screens .
a . Arc Button: Switches the Main
Screen to the Arc Screen
b . Tack Button: Switches the Main
Screen to the Tack Screen
c . Save Load Button: Brings up the
Save Load Window
d . Settings Button: Switches the
Main Screen to the Settings
Screen
2 . Metals Selection
a . Rotating Scroll View with many
different Metals allows the user
to load recommended settings based on the metal they are using .
3 . Application Selection Buttons: Allows the user to get recommended settings based on their application
a . Large Join Button: Loads the recommended settings for a large join weld based on the metal selected .
b . Small Join Button: Loads the recommended settings for a small join weld based on the metal selected .
c . Post Button: Loads the recommended settings for a post weld based on the metal selected .
d . Add Metal Button: Loads the recommended settings for adding metal based on the metal selected .
e . Prong Button: Loads the recommended settings for tipping a prong based on the metal selected .
4 . Energy Selection Area: Allows the user to customize the energy settings of the welder .
a . Minus Button: Lowers the energy in increments . (Hold to continue lowering the energy)
b . Spot Size Calculator: Shows the user the estimated spot size in real time and at 6 different positions .
c . Energy Slider: Allows the user to quickly switch energies .
d . Energy Display: Shows the user the current energy value .
e . Plus Button: Increases the energy in increments . (Hold to continue increasing the energy)
5 . Options Buttons
a . Play/Pause Button: Switches the welder from a ready state to a pause state .
b . Undo Button: Allows the user to undo the last change they have made .
c . Redo Button: Allows the user to redo the last change they have undone .
d . Reset Button: Allows the user to reset the basic arc settings to their factory default settings .
6 . Advanced Options Buttons
a . Agitation Button: Allows the user to cycle through the available agitations . (None, Sustained, Negative)
b . Ignition Button: Allows the user to cycle through the available ignitions . (Standard, Standard+)
c . Trigger Button: Allows the user to cycle through the available trigger types . (Touch Detect, Foot Pedal)
12