Shell - Midea WQP6-3705-AU Technical Service Manual

Removal and Replacement
1. Remove outer door assembly. (see outer door removal and installation)
2. Remove control panel .(see control panel removal and installation)
3. Remove dispenser. (see dispenser removal and replacement)
4. Remove all screws for fixing inner door to right hinge assembly and left hinge assembly.
5. Remove dispenser. (see dispenser removal and replacement)
6. Reverse the above procedure to install. And check out all connectors connected well.

Shell

Removal and Installation
1. Remove all screws for fixing shell with tank and bottom board assembly in the rear of
dishwasher machine.
2. Push the shell from front to back. And take it away from the machine.
3. Reverse the above procedure to install. And check out all connectors connects well.
Top View (with shell removed)
Screws
Screws
15