Shell - Midea WQP6-3207A Technical Service Manual

4. Remove dispenser. (see dispenser removal and replacement)
5. Remove door handle assembly. (see door handle assembly removal and replacement)
6. Reverse the above procedure to install. And check out all connectors connects well.

Shell

Removal and Installation
1. Take off cutlery basket, basket and filter system.
2. Remove all screws for fixing shell with tank assembly in the front of dishwasher machine.
Screws
3. Remove all screws for fixing shell with backboard and bottom board in the rear of
dishwasher machine.
4. Turn the dishwasher machine. Remove all screws for fixing shell with bottom board in the
bottom of dishwasher machine.
Snap-fits (1)
Screws
Snap-fits (2)
5. Unfix all snap-fits for fixing shell with other parts. Include two
snap-fits of backboard (1), two snap-fits of washboard (3),
and six snap-fits of bottom board (2), (4) and (5).
Tips
: If you press edges of shell like illustrator, you can easy
unfix all snap-fits after removing all screws that fix shell with
other parts.
6. Reverse the above procedure to install. And check out all
connectors connects well.
Back View (with shell removed)
Screws
Snap-fits (3)
Snap-fits (4)
Screws
Snap-fits (5)