Heating Pump Assembly - Midea WQP6-3705-AU Technical Service Manual

Part Name: 1 – heating pump assembly 2 – lower pump cover
3 – motor assembly 4 – motor hunger
Removal and Replacement
1. Remove cover of bottom board. (see main control board removal and replacement)
2. Pull out all terminals of heating pump motor assembly.
Terminals
3. Remove clamps fixing heating pump motor assembly to sump of bottom board.
4. Unfit motor hungers fixing heating pump motor assembly to bottom board.
5. Reverse the above procedure to install. And check out all connectors connected well.

Heating pump assembly

Terminals
Clamps
1
Part Name: 1 – motor hunger
8
1
2
3
4