4. Remove dispenser. (see dispenser removal and replacement)
5. Remove door handle assembly. (see door handle assembly removal and replacement)
6. Reverse the above procedure to install. And check out all connectors connects well.
Shell
Removal and Installation
1. Take off cutlery basket, basket and filter system.
2. Remove all screws for fixing shell with tank assembly in the front of dishwasher machine.
Screws
3. Remove all screws for fixing shell with backboard and bottom board in the rear of
dishwasher machine.
4. Turn the dishwasher machine. Remove all screws for fixing shell with bottom board in the
bottom of dishwasher machine.
Snap-fits (1)
Screws
Snap-fits (2)
5. Unfix all snap-fits for fixing shell with other
Include two snap-fits of backboard (1),
two snap-fits of washboard (3), and six
snap-fits of bottom board (2), (4) and (5).
Tips
: If you press edges of shell like
illustrator, you can easy unfix all snap-fits
removing all screws that fix shell with
parts.
6. Reverse the above procedure to install.
And check out all connectors connects
well.
Back View (with shell removed)
Screws
Snap-fits (3)
Snap-fits (4)
Screws
Snap-fits (5)
parts.
after
other