Executing The Demos - Xilinx MicroBlaze Spartan-3E 1600E Edition Getting Started

Demo Description and Configuration Mode Settings

Executing the Demos

1.
2.
3.
4.
5.
6.
7.
Note:
10
Position the SP3E1600E board so the SPARTAN-3E and XILINX logos are oriented
upright.
Make sure the power switch, located in the upper left corner of the board, is in the off
position.
Plug the power supply adapter cable into the SP3E1600E board. Plug in the power
supply to AC power.
Assure that the configuration jumpers to Master Serial mode, as shown in Table, for
the Hello World Demo.
Connect a null modem serial cable between your PC and the SP3E1600E board's DTE
connector and open a serial terminal program.
a. The serial configuration settings need to be set as follows:
- Bits per second = 115200
- Data bits = 8
Parity = None
-
- Stop bits = 1
- Flow control = None
b. There is a HyperTerminal script file, SP3E1600E.ht, provided in the
/reference_system/SP3E1600E_HelloWorld directory on the
Development Kit Reference CD. Double click on this file to open a HyperTerminal
window with the appropriate settings.
Turn on the SP3E1600E board's main power switch. If the configuration jumpers are
set to Master Serial mode, then the Hello World Demo will automatically start.
To restart or load another demo, set the configuration jumpers to the proper settings
for the desired demo, and depress the PROG pushbutton or simply power-cycle the
main power switch.
a. The selected demo will load from the appropriate PROM and the DONE LED will
light upon completion of the download.
The Web Server Demo requires an ethernet connection from the board to a host computer.
Getting Started with the MicroBlaze Development Kit - Spartan3E 1600E Edition
www.xilinx.com
R
UG258 (v1.0) June 29, 2006