Table of Contents
Advertisement
BRUSH/PAD-HOLDER DECK DISASSEMBLY/ASSEMBLY [Vantage 17 Battery]
Disassembly
1.
Remove the batteries.
2.
Remove the caps (A) and disconnect the electrical connections from the brush motor (B).
3.
Remove the left deck fastening screw (58).
4.
Use a protection (D) to avoid damaging the machine and tilt it carefully to lay its left side on the floor.
5.
Disconnect the solution hose (E) from the solenoid valve (F).
6.
Remove the right deck fastening screw (57).
7.
Remove the deck (H).
Assembly
8.
Assemble in the reverse order of disassembly, and note these items:
•
When reassembling the deck (H), reinsert the deck fixing springs (I) correctly.
VANTAGE 17 Battery / Cable
SERVICE MANUAL
OTHER SYSTEMS
9097182000 - 11/2009
ENGLISH
S301376
S301220
33
Advertisement
Table of Contents
Troubleshooting
