ENGLISH
SERVICE MANUAL
GENERAL INFORMATION
MAINTENANCE
SCHEDULED MAINTENANCE
The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
See the GENERAL INFORMATION and SAFETY paragraphs.
Provided below is the Scheduled Maintenance Table. The intervals shown may vary according to particular working conditions,
which are to be defined by the person in charge of the maintenance.
For instructions on maintenance procedures, see the following paragraphs.
SCHEDULED MAINTENANCE TABLE [Vantage 17 Battery]
Procedure
Squeegee cleaning
Brush cleaning
Tank and vacuum grid with float cleaning
Battery charging
Squeegee blade check (and replacement)
Solution filter cleaning
Battery (WET) fluid level check
Screw and nut tightening check
Brush motor carbon brush check or replacement
Vacuum system motor carbon brush check or replacement
(1): and after the first 8 working hours
SCHEDULED MAINTENANCE TABLE [Vantage 17 Cable]
Procedure
Squeegee cleaning
Brush cleaning
Tank and vacuum grid with float cleaning
Squeegee blade check (and replacement)
Solution filter cleaning
Screw and nut tightening check
Vacuum system motor carbon brush check or replacement
(1): and after the first 8 working hours
INTEGRITY CHECK OF POWER SUPPLY CABLE AND EXTENSION
Carefully check if the power supply cable, the extension and the plugs are worn or damaged.
If necessary, have them replaced by the Service Center.
8
9097182000 - 11/2009
Daily or after
using the
machine
Daily or after
using the
machine
VANTAGE 17 Battery / Cable
Every six
Weekly
months
(1)
Every six
Weekly
months
(1)
Yearly
Yearly