Labels And Symbols On The Product; Product Label; Other Labels And Symbols - Invacare Soft Tilt User Manual

Invacare® Soft Tilt
Electromagnetic interference
WARNING!
Risk of malfunction due to electromagnetic
interference
Electromagnetic interference between this
product and other electrical equipment can occur
and disturb the electrical adjustment functions
of this product. To prevent, reduce or eliminate
such electromagnetic interference:
– Only use original cables, accessories and spare
parts, to not increase electromagnetic emission
or reduce electromagnetic immunity of this
product.
– Do not use portable radio frequency (RF)
communications equipment closer than 30 cm
to any part of this product (including cables).
– Do not use this product near active
high-frequency surgical equipment and the
RF shielded room of a system for magnetic
resonance imaging, where the intensity of
electromagnetic disturbances is high.
– If disturbances occur, increase the distance
between this product and the other equipment
or switch it off.
– Refer to the detailed information and follow
the guidance in chapter 10 Electromagnetic
compatibility (EMC), page 23.

2.2 Labels and symbols on the product

2.2.1 Product label

The product label is placed on the main module of the Soft
Tilt and contains the main product information, including
technical data.
6
Symbols
Serial Number
Reference Number
Manufacturer Address
Manufacturing Date
Max. User Weight
Max. Safe Working Load
Insulation Class 2
Type B Applied Part
WEEE conform
This product complies with Directive 93/42/EEC
concerning medical devices. The launch date
of this product is stated in the CE declaration
of conformity.
Abbreviations for technical data:
• Iin = Incoming Current
• Uin = Incoming Voltage
• Int. = Intermittence
For more information about technical data, refer to 9
Technical Data, page 21.

2.2.2 Other labels and symbols

• AC = Alternating Current
• Max = maximum
• min = minutes
Refer to User Manual
1605513-C