Seat Lock - TVS Apache RR 310 Owner's Manual

KNOW YOUR MOTORCYCLE
Seat Lock (Rider and Pillion Seat)
This motorcycle is equipped with a lockable
rider and pillion seats. The seat lock (A) is
located between the rider and pillion seat as
shown (ref. Fig. 29)
To open pillion seat:
w
Insert the control key into the seat lock.
Rotate the key in clockwise until the lock is
released.
w
Pull and release the front section of the seat
first, slide the seat towards vehicle front
direction.
w
Ensure the hook underneath got released
from frame and take out the seat.
st
Revision:- Rev. 1, 1 Aug'2018 onwards
A
Fig. 29
To close pillion seat:
w
Slide the rear end of the seat bottom
underneath the frame hook.
w
Locate the seat lock pin into seat lock latch
and gently press (at the front end).
- Finally ensure that the seat is fastened
securely to the frame.
To open the rider seat:
w
Remove the pillion seat as explained earlier
and take out the control key from the seat
lock without fail.
w
Take off the tool kit from the storage (ref.
Fig. 30)
53
Fig. 30