Moving The Vehicle - TVS Apache RR 310 Owner's Manual

RIDING YOUR MOTORCYCLE

Moving the Vehicle

w
Disengage the clutch by pressing the
control lever.
w
Press the gear shift pedal downwards with
the tip of your foot to engage the first gear.
w
Increase the engine speed by turning the
throttle twist grip while gradually releasing
the clutch lever; the motor cycle start
moving forward.
w
Release the clutch lever and increase the
engine speed (increase the throttle).
w
To up shift the gear, close the throttle to
slow down the engine speed, disengage
the clutch, lift the gear shift pedal up and
release the clutch lever.
- To down shift the gear, proceed as follows:
release the throttle twist grip, pull the clutch
lever, increase the engine speed for a
moment to allow the gears to synchronise,
down shift the gear and release the clutch
lever.
- Use controls wisely and promptly: when
riding uphill do not hesitate to down shift the
gears as soon as the vehicle tends to slow
down. This will avoid stressing the vehicle
and the engine abnormally.
st
Revision:- Rev. 1, 1 Aug'2018 onwards
Caution
Avoid sudden acceleration,
as this may lead to misfiring, improper
engagement of transmission (snatching).
Do not pull the clutch lever longer than
necessary after engaging the gear. Otherwise
the friction plates in clutch may get overheat
and wears out quickly.
59