Ignition/Steering Lock - TVS ZT125 Owner's Manual

Table of Contents

Advertisement

KNOW ABOUT YOUR ZT 125

IGNITION/STEERING LOCK

TVS ZT 125 comes with a set of two keys. Both
can be used to operate ignition lock, steering
lock, fuel tank cap and seat lock.
.
IGNITION LOCK AT ONCE STEERING LOCK
Ignition lock have three position :
Position 'OFF'
All electrical circuits are at the 'OFF' (dead). The
keys can be revoked.
Position 'ON'
In this position you can start the engine, when the
engine dies then you can just turn the lights on
dusk, brake lights and horn and when the machine
is turned on, you will be able to turn on the lights
dusk, headlights, brake lights and horn. Ignition
key can not be removed when the contacts in the
'ON' position.
Position 'LOCK'
ZT 125 is equipped with handlebar lock feature in
two directions (left or right). To lock the
handlebars, point to one of the steering handlebar
left or right. Navigate the ignition key to 'OFF'.
Press the key and change to 'LOCK'. Then remove
the key.
G
Never move the vehicle when the steering handlebar
is locked, you can lose your balance.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents