Figure 3. Main Mps Window; Figure 4. Codeplug Editor - Motorola Mobile Workstation 800 Series Owner's Manual

• Click on Codeplug Editor
To modify configuration parameters use the MPS tool as the following:
• Click on Read from Display to read the codeplug parameters. If your device
is successfully read, you will see CPU parameters.
• Click on Save to file to backup the original codeplug data.
• Modify a parameter per your selection.
• Click on Write to Display to program the device.
• If the device is successfully programmed, the following message appears.
CAUTION: Incorrect configuration can make the device unworkable. Please, make
sure to acquire the appropriate codeplug. Always make a backup copy in case you
have made a mistake during the update.

Figure 3. Main MPS Window

Figure 4. Codeplug Editor

17