Dc Voltage Measurement; Ac Voltage Measurement; Resistance Measurement - Pro'sKit MT-3110 User Manual

affected by various factors such as the socket design and insulation thickness
types are different and so on.
2） In NCV detection mode, the meter will not measure the voltage, resistance and
current at the same time.

4.7 DC Voltage Measurement

1） Connect the test lead to the measured signal, when the measured signal ≥0.3V,
will the meter display current measuring DC voltage value. When measured
signal is <0.3V, the meter will be default as resistance value, displays the ohm
of the measured signal.

4.8 AC Voltage Measurement

1） Connect the test lead to the measured signal, when the measured signal ≥1V,
will the main LCD of the meter display current measuring AC voltage value,
and the vice LCD will display the frequency value of the voltage. When
measured signal is ＜1V, the meter will be default as resistance value, displays
the ohm of the measured signal.

4.9 Resistance Measurement

1） Connect the test lead to the measured resistance, when the measured resistance
>10M, the meter will display----, when the measured resistance is less than
8