Introduction; Manual Contents; Purpose; Spare Parts And Maintenance - Viper AS430C User Manual

ENGLISH

INTRODUCTION

NOTE
The numbers in brackets refer to the related components shown in Machine
Description section.

MANUAL CONTENTS

This manual is to provide the operator with the necessary information to use this machine properly
and safely. The information includes the technical data, safety, operation, storage, maintenance and
disposal of the machine. The operator and technicians with related qualifications must study this
manual carefully before commencing the operation and maintenance of this machine. Please contact
VIPER for any queries on the explanation of this manual or when further related information is needed.

PURPOSE

The intention of this manual is to enable the operator and qualified technicians to accomplish the
maintenance of this machine.
The operator must not perform those operations that should only be performed by technicians. VIPER
will not be responsible for any damages caused by the violation of this rule.

SPARE PARTS AND MAINTENANCE

All necessary operation, maintenance, and repair procedures must be performed by qualified
personnel or by the service centers of VIPER
Only Authorised spare parts and accessories should be used.
If service and ordering of spare parts or accessories are needed, please contact VIPER with the
model number of the machine and serial numbers.

CHANGES AND IMPROVEMENTS

VIPER makes continuous improvements on its products. VIPER reserves the right of changing and
improving the machines, and also the right of deciding by itself whether the benefits brought about by
the changes are applicable to the products already sold. All changes or extra accessories must be
agreed by VIPER and must be performed by the company.

SCOPE OF APPLICATION

This scrubber is used in a domestic and industrial environment, and is suitable for the cleaning of
smooth and hard floors (scrubbing and waste water collection).
operators and in a safe environment.
carpets, and on relatively coarse floors.

IDENTIFICATION DATA

The machine model and serial number are marked on the plate (4).
This information is useful when requiring machine spare parts, Use the following table to write down
the machine identification data.
MACHINE mode..................................................................
MACHINE serial number.......................................................

UNPACKING/TRANSPORT

Please follow carefully the instructions on the package when unpacking.
On delivery, please inspect the packing and the machine to ensure no
damage has been done during transport. If there is any visible damage,
please keep the original form, and ask the carrier to confirm and fill out
a list of damages for compensation.
－ CAUTION
When unpacking and unloading, or during moving the
machine across ground with steps, please take care to
avoid hitting the on/off switch regulating the water flow,
Part A in the figure on the right.
Check if the machine is equipped with the following items:
2
USER MANUAL
This scrubber can not be used for cleaning outdoors, on
VF90015-EU
It must be used by qualified