Unpacking; Setting Up; 2-Channel Positioning; Av Positioning - Monitor Audio Platinum In-Wall II Owner's Manual

Unpacking

Before you unpack your speakers, please make sure that there is plenty of clean floor area available. Pictorial guides
printed on the outer transit carton show you the ideal method for unpacking. Please see below for more information.
WARNING: DO NOT attempt to lift the speakers alone. The recommended number of people is printed
on the outer carton.
Lay the box down on the floor so the opening is on the side facing up. Open the outer carton and then use the handles of the
inner cardboard sleeve to lift the speaker and packaging out of the box. Once clear, remove the polystyrene end caps and
then the cloth bag.

Setting Up

2-Channel Positioning

When arranging a 2-channel system, the listening position and the loudspeakers should form an equilateral triangle.
The speakers should be positioned approximately 6 - 10 feet (1.8 - 3m) apart. They should be positioned so that the
tweeter is at approximate ear height when you are in your listening position.

AV Positioning

Please refer to the illustration below and opposite for the ideal angles and positions of each speaker in your surround
system.
The centre channel will need to be as close to the screen as possible to ensure the sound does not sound disjointed.
An example of a Platinum 7.1 system consisting of Platinum In-Wall II's front Left - Centre - Right and PL100 II surrounds, with the PLW215 II subwoofer.
4 Platinum In-Wall II