OSD Warning Messages
When the monitor does not support a particular resolution mode, you will see the
following message:
NOTE: The message may be slightly different according to the
connected input signal.
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. Recommended mode is 5120 x 1440.
You will see the following message before the DDC/CI function is disabled:
When the monitor enters the Power Save mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD.
NOTE: The message may be slightly different according to the
connected input signal.
Monitor Specifications
for the Horizontal and Vertical
Operating the Monitor
│
61