Back View - Dell UltraSharp U4919DW User Manual

Back View

Label
1, 2 VESA mounting holes of 100 mm
x 100 mm (1) and 200 mm x 100
mm (2) are supported.
3 Regulatory label
4 Barcode serial number label
5 Cable management slot
Back view without and with monitor stand
Description Use
Attach stand to the monitor using
200 mm x 100 mm with M4 x 10
mm screws.
For third party wall mount, it is
recommended using 200 mm x 100
mm VESA-compatible wall mount
kit with M4 x 10 mm screws.
Lists the regulatory approvals.
Refer to this label if you need to
contact Dell for technical support.
Use to organize cables by placing
them through the slot.
About Your Monitor
│
11