Dell UltraSharp U4919DW User Manual page 47

HDMI 2
Auto Select
Auto Select for
USB-C
Reset Input
Source
Color
Select the HDMI 2 input when you are using the HDMI
2 connector. Press the
input source.
Turning on the function allows you to scan for available
input sources.
Allows you to set Auto Select for USB-C to:
• Prompt for Multiple Inputs: Always displays the
"Switch to USB-C Video Input" message for you
to choose whether to switch or not.
• Yes: Always switch to USB-C video input (without
asking) when the USB Type-C cable is connected.
• No: Never automatically switch to USB-C video input
when the USB Type-C cable is connected.
NOTE: Auto Select for USB-C is only available when
Auto Select is turned On.
Reset your monitor input settings to the factory
settings.
Use Color to adjust the color setting mode.
button to select the HDMI 2
Operating the Monitor
│
47